Outer Diameter: | 24mm | Product of Origin: | Guangdong ,China |
Brand: | SigGear /OEM / ODM | Motor Type: | Brush ,Brushless , Coreless .Stepper.etc |
Protect Level: | Basic ,Totally Enclosed , Water proof or customized request | Application Field: | Customer Request |
Life Time Warranty: | At least 2 years | Structure: | Spur Gearbox , Planetary , Worm , Cycloidal, Harmonic |
Material: | Metal and Plastic | Certification: | ISO9001 ITAF16949 |
Planetary reducer is a widely used industrial products, the reducer small size, light weight, high bearing capacity, long service life, smooth operation, low noise. It has the characteristics of power shunt and multi-tooth meshing.
Progression: The number of sets of planetary gears. Because one set of planetary gears cannot meet the larger transmission ratio, sometimes two or three sets are needed to meet the requirements of supporting the larger transmission ratio. Due to the increase in the number of planetary gears, the length of the 2 or 3 stage reducer will be increased, and the efficiency will be decreased.
Return gap: The output end is fixed, the input end rotates clockwise and counterclockwise, so that the input end produces rated torque +-2% torque, the input end of the reducer has a small angular displacement, this angular displacement is the return gap. The unit is "minute", that is, one sixtieth of a degree, also known as the back gap.
Housing material | Steel |
Gearwhddl material | Steel |
Bearing at output | Ball Bearings |
Radial load(10mm from flange) | ≤3.0kgf |
Shaft axial load | ≤1.0kgf |
Radial play of shaft | ≤0.04mm |
Thrust play of shaft | ≤0.3mm |
Backlash,at no-load | ≤1.2° |
Max permissible speed at continuous working | ≤8000RPM |
Operating temperature range | -40~120℃ |
Nominal(VDC) | 3 ~ 36VDC |
DC motors | Suitable for DC motors with power less than 28W,When the motor cannot meet the installationrequirements of the reducer,it needs to be negotiated separately. |
Note: Only part of the data is presented in the table. If there is any need, please communicate with the project leader to accept the design and development of special specifications.